Testing
A test report from SKG-IKOB gives your customers and buyers objective evidence about the quality of your product, which strengthens your market position. We are your partner for research in product development, construction site inspections and arbitration cases. SKG-IKOB carries out tests in its own laboratory and is accredited for this purpose. With our measuring truck and mobile testing equipment, we also carry out tests at the location of your choice. Expertly and objectively.
We can help you
Call 088 244 01 00
Good building starts with SKG-IKOB
Plastic windows and doors
To determine whether a plastic facade element meets the requirements, SKG-IKOB carries out tests to determine the wind load to be absorbed, the number of times a window or door can open and close and whether the facade is smoke-tight. We carry out these tests for KOMO certification and CE marking.
Testing
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Metal facade elements
To determine whether a metal facade element meets the requirements, SKG-IKOB carries out tests to determine the wind load to be absorbed, the number of times a window or door can open and close and whether the facade is smoke-tight. We carry out these tests for KOMO certification and CE marking for EN 14351-1, EN 13241, EN 14963 and EN 1873.
Products
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Awning
As an expert and independent party, SKG-IKOB can also carry out tests on awnings. One of the tests that can be carried out is the testing of awnings for strength. This according to the EN 1932 standard. Does your product pass the test? Then this results in a valuable declaration that can be converted into a HR-Ready declaration. A confirmation of quality, also for your customers.
Products
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Safety
Everyone wants to feel safe in their homes. That is why SKG-IKOB conducts tests related to, for example, burglar resistance and fall-through safety.
Products
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Burglar resistance - Charles Wallert - c.wallert@skgikob.nl
Glass and panels - Frits Koldenhof - f.koldenhof@skgikob.nl
'Smoke resistance' or 'Fall-through safety and impact loading' - Marcel Peters - m.peters@skgikob.nl
Concrete and concrete mortar
SKG-IKOB tests concrete for compressive strength on drilled cylinders and concrete cubes according to EN 12504-1 and EN 12390-3. We determine the density according to EN 12390-7.
Chlorides in concrete can cause corrosion of the reinforcement. With a method derived from CUR recommendation 72 method Volhard (Bouwdienst RWS BSW 96-01) and the NEN-EN 14629: 2007 we determine the chloride content of the sample you supply.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Did you know that we can also certify concrete, cement, mortars and adhesives?
Also check out our options for providing your products with concrete, cement, mortars and adhesives product certification.
Who can I ask for more information from?
For more information, please contact:
Chlorides in concrete that can cause corrosion of reinforcement - Erik Kampman - e.kampman@skgikob.nl
Cement
When testing cement, SKG-IKOB looks at determination of compressive strength, initial and final bonding, chloride and sulfate content, insoluble constituents, loss of annealing, shape retention and fineness. For the determination of other properties we cooperate with specialized recognized laboratories.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Did you know that we can also certify concrete, cement, mortars and adhesives?
Also check out our options for providing your products with concrete, cement, mortars and adhesives product certification.
Who can I ask for more information from?
For more information on cement testing, please contact:
Granular materials
Of various aggregates such as sand and gravel used in mortars, concrete, asphalt and road construction, we can determine the particle size distribution according to EN 933-1.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Adhesives for tiles
SKG-IKOB carries out tests for bond strength, shear strength, open time, slip and deformation on cementitious and dispersion adhesives in accordance with EN 12004-2. The test results are usable for CE marking according to EN 12004.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Did you know that we can also certify concrete, cement, mortars and adhesives?
Also check out our options for providing your products with concrete, cement, mortars and adhesives product certification.
Who can I ask for more information from?
For more information, please contact:
Sewer core survey
According to an established protocol, we test supplied drill cores for dry volume mass, water absorption, carbonation front and split tensile strength. In addition, we calculate the derived compressive strength in accordance with CUR report 52. The results of these tests provide insight into the residual life of the sewer. They are widely used by sewer maintenance companies.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Aerated concrete
SKG-IKOB tests various properties of aerated concrete, such as moisture content, dimensions, compressive volumetric mass, water absorption, freeze-thaw resistance and water absorption. We carry out tests according to EN 771-4, EN 772-1, EN 772-9, EN 772-10, EN 772-13, EN 772-14, EN 772-16, EN 772-18.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Limestone
We test various properties of sand-lime brick, such as moisture content, dimensions, compressive volumetric mass, water absorption, freeze-thaw resistance and water absorption. We carry out the tests according to EN 771-2, EN 772-1, EN 772-9, EN 772-10, EN 772-13, EN 772-14, EN 772-16, EN 772-18.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Mortars for masonry
We test the various properties of mortars for masonry according to EN 1015-3, EN 1015-6, EN 1015-7, EN 1015-10, EN 1015-11. These include testing spread size, bond strength, volumetric mass, air content and flexural tensile and compressive strength.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Raveel/girdle shoes
Manufacturers of raveel/girdle shoes must determine the performance of load capacity and deformation under load with tests. This makes these tests an essential part of preparing the declaration of performance for the legally required CE marking. SKG-IKOB will gladly carry out these tests for you.
What is a raveel/girdle shoe and what trials are there for it?
A joist / purlin hanger is a support structure used to mount a wooden beam, such as a joist or purlin beam, on or to masonry.
Our accreditation applies to tests for products that fall within the scope of product standard NEN-EN 845-1+A1, Specifications for ancillary products for stone structures - Part 1: Cavity anchors, wall anchors, joist / purlin hanger and support products.
The tests for determining the load-bearing capacity and deformation under load of raveel/girdle shoes are carried out, as prescribed from this product standard, on the basis of the test standard NEN-EN 846-8+A1 Test methods for ancillary products for stone structures - Part 8: Determination of the load-bearing capacity and load deformation behavior of beam girders.
SKG-IKOB is also accredited to perform testing on these ancillary masonry products: cavity anchors, brackets (support products) and lintels.
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Cavity and wall anchors and lintels
To determine the quality of cavity and wall anchors and lintels, we test various properties. For this purpose, we test compressive, tensile, buckling and bending strength, displacement under load and determination of load-bearing capacity according to EN 846-5, EN 846-6, EN 846-8, EN 846-9 and EN 846-10 for the product standard EN 845-1.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Hardware
In addition to operating strength and durability, SKG-IKOB also tests the other properties of your hardware product according to the applicable European product standards. We can also issue CE Certificates of performance resistance or SKG-IKOB conformity certificates.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Mechanical security devices
We test mechanical security devices of vehicles in accordance with inspection regulation MP03 of the VbV (Verzekeringsbureau Voertuigcriminaliteit). These include caravan and trailer locks, wheel clamps, gearbox locks, as well as outboard motors and (sea) container locks.
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Who can I ask for more information from?
For more information, please contact:
Two-wheel locks
Most insurance companies require an ART MBT-04 approved lock when taking out theft insurance. SKG-IKOB tests two-wheeler locks in accordance with ART inspection regulation MBT-04. The ART foundation is committed to preventing theft of two-wheelers through more and better prevention. ANWB, BOVAG, RAI and insurers are represented.
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Who can I ask for more information from?
For more information, please contact:
Façade insulation systems
Exterior wall insulation systems are coated with more and more different materials. Good adhesion of this finishing coat is of great importance. We can test your system according to various EADs for hygrothermal resistance, freeze-thaw resistance, mechanical load-bearing capacity and adhesion strength.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
PUR/PIR, EPS and mineral wool
SKG-IKOB carries out various tests on insulation materials such as PUR/PIR, EPS and mineral wool. We test thermal resistance, form stability, compressive strength, water absorption and water vapor permeability. Based on EN product standards, once approved, CE marking is also issued for them.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Airtight sealing materials
With BENG requirements, the choice of materials becomes more important to ensure the airtightness of the building. SKG-IKOB can test your sealing materials according to the relevant standards. We also issue KOMO product certificates for sealing products for airtight construction according to BRL 2804-1.
What investigations and trials do we do?
Testing prototype
If you engage SKG-IKOB to test your prototype, you will know at an early stage whether improvements are desired or necessary. This allows you to optimize the product.
Construction site inspections
Sometimes doubts about building products or constructions arise when construction is already a fact. Even then, SKG-IKOB can carry out an inspection for you. In doing so, we check the situation against relevant assessment guidelines and standards. Municipalities, construction companies and architects therefore regularly call upon the independent opinion of SKG-IKOB to remove these doubts. We also carry out tests on the building site or test building products in our laboratory.
Arbitration cases
It may happen that a dispute arises around complaints about building products. The owner, contractor, manufacturer, consultant, architect, attorney, arbitration body or court may then request SKG-IKOB to conduct an objective and expert inspection. In arbitration cases, we test the situation against relevant assessment guidelines and standards.
SKG-IKOB assesses at the earliest possible stage whether a follow-up investigation is necessary, such as a specialized test or calculation. Once the cause of the complaint has been analyzed, we will gladly think with you about the technical preconditions for the repair method.
Who can I ask for more information from?
For more information, please contact:
Didn't find what you were looking for?
Try our smart filter. Here you search the website by any topic and find out what SKG-IKOB does and knows within this.
Latest News
We will keep you informed of all developments in the industry
SKG-IKOB has new test rig for testing lintels for masonry work
SKG-IKOB Certificatie has recently acquired a new set-up in the laboratory for testing lintels. With this setup, lintels with lengths up to 4.5 meters span can be tested for bending strength and shear strength.
SKG-IKOB tests air and water tightness of facades on site with various equipment
Airtight construction is a trend while contributing to building quality. Reducing energy consumption is becoming more important as government requirements become more stringent. With current techniques and controls, the requirements are met. However, it is now very important that with the more stringent requirements, windows doors and façade elements are carefully produced and assembled. Imperfections in production or assembly lead to air losses or water leaks in practice.
Our colleagues will be happy to help you
Jos van Schijndel
Coordinator
